R928045188力士樂濾芯

該模型歧管設計擴展流程

range of ModuFlowTM Filters when operating with 10 Micron

10微米范圍moduflowtm過濾器操作時

and fi ner fi lter media. When mounted to a pair of RFP-2 or

押尼珥濾波器和網絡媒體。當安裝在一對rfp-2或

ILP-2 fi lters, this manifold will allow fl ows up to 130 gpm

ilp-2 FI歧管過濾器，這將使佛羅里達州OWS多達130加侖

in return lines (15 fps velocity).

在回歸線（15 fps的速度）。

Note: The Model MM manifold is not applicable to suction

注：該模型不適用于吸入歧管

lines due to its pressure drop characteristics.

線由于其壓降特性。

When used with two ModuFlowTM fi lters, the total cost is

當使用兩個moduflowtm FI濾波器，總成本

often less than a single unit fi lter rated for 130 gpm fl ow.

往往不是一個單一的單元濾波器的額定為130 gpm的流量少。

Tank-top mounted (Model RFP) fi lters will require only one

水箱頂部安裝（模型RFP）FI過濾器將只需要一個

manifold on the fi lter inlet pports. In-line mounted (Model

在濾波器的進對流形。在安裝（模型

ILPav) fi lters will require two manifolds, one on the inlet

ilpav）FI過濾器將需要兩個歧管，一個入口

and one on the outlet ports.

和一個出口的港口。

Multiple Uses

多用途的

Although designed for manifold ModuFlowTM fi lters, the

雖然設計流形moduflowtm FI濾波器，其

Model MM can be used in a variety of applications which

模型可以用于各種各樣的應用

require:

要求：

? Splitting fl ow between components

?FL OW組件之間的分裂

Such applications are frequently encountered on mobile

這樣的應用是經常遇到的在移動

equipment, machine tools, and large lubricating

設備，機床，和大的潤滑

systems. In such applications, use of a manifold can often

系統。在這樣的應用中，使用一個流形可以經常

reduce total piping and installation costs.

降低總管道和安裝成本。